LED Landscape Bulbs Flickering on a Magnetic Transformer: How to Diagnose It
LED landscape bulbs flickering on a magnetic transformer? Identify the transformer type, check minimum load and choose one of three proven fixes.
Corroded Landscape Lighting Connectors: How to Spot Them and Repair the Run
Corroded connectors cause most dim, flickering or dead fixtures on older lighting systems. Learn how to spot them, audit a run and replace them correctly.
Photocell Not Turning Landscape Lights on at Dusk: Troubleshooting Guide
Photocell not turning landscape lights on at dusk? Run one quick test, then check mounting, manual mode and wiring before you replace the sensor.
GFCI Tripping on Your Landscape Lighting Transformer: Step-by-Step Diagnosis
GFCI tripping on a landscape lighting transformer? Follow six steps to isolate the outlet, transformer and low-voltage runs and find the ground fault.
One Path Light Out, Rest Working: 5 Checks Before You Replace the Fixture
One path light out while the rest work? Run five checks on the bulb, socket, voltage, splice and stake before you replace the fixture. Most fixes take 15 min.
Why Half Your Landscape Lighting Zone Stopped Working Overnight
Half a landscape lighting zone dark overnight? Find the single failure point on the run: a cut wire, failed splice, tripped GFCI or water in a connector.
Why Your Low-Voltage Landscape Lights Are Dim at the End of the Run
Dim lights at the end of a low-voltage run point to voltage drop. Measure at the transformer and last fixture, then fix it with taps, wire gauge or load.
Landscape Lights Flickering: 7 Causes and How to Fix Each One
Landscape lights flickering? Work through seven causes in order, from loose connections and voltage drop to transformer mismatch, and fix each one fast.
- 1
- 2
Shop by category
