Corroded Landscape Lighting Connectors: How to Spot Them and Repair the Run
Corroded connectors cause most dim, flickering or dead fixtures on older lighting systems. Learn how to spot them, audit a run and replace them correctly.
Why Half Your Landscape Lighting Zone Stopped Working Overnight
Half a landscape lighting zone dark overnight? Find the single failure point on the run: a cut wire, failed splice, tripped GFCI or water in a connector.
Why Your Low-Voltage Landscape Lights Are Dim at the End of the Run
Dim lights at the end of a low-voltage run point to voltage drop. Measure at the transformer and last fixture, then fix it with taps, wire gauge or load.
Landscape Lights Flickering: 7 Causes and How to Fix Each One
Landscape lights flickering? Work through seven causes in order, from loose connections and voltage drop to transformer mismatch, and fix each one fast.
How to Install a Low-Voltage Landscape Lighting System in One Weekend
Install a complete low-voltage landscape lighting system in one weekend. Plan, stage, install and adjust with realistic time estimates for first-timers.
How to Bury Low-Voltage Wire Correctly: Depth, Path and Protection
Learn how deep to bury low-voltage landscape lighting wire, the fast slit-and-fold method and how to protect splices so the wire stays trouble-free for years.
Two-Wire Irrigation Systems: How They Work and When to Use Them
Two-wire decoder systems use up to 70 percent less wire than conventional wiring and offer real-time diagnostics. Here is what sets them apart.
How to Find and Fix a Wire Fault in a Two-Wire Irrigation System
A systematic approach with the right tools turns a potentially day-long wire fault diagnosis into a two-hour repair.
Shop by category
